Manual Linksys BEFSR11 ver. 2 (page 17 of 66) (English)

602204

Zoom out

Zoom in

1/66

EtherFast

Cable/DSL Routers

Instant Broadband

™

Series

9. When your PC has finished restarting, click the Start button, and select

Settings and Control Panel. Double-click Network. Make sure that

TCP/IP is installed on your PC, as shown on the screen in Figure 6-8. By

default, Windows 98 has TCP/IP installed. If TCP/IP is not installed, please

go to “Appendix D: Installing the TCP/IP Protocol” for installation instruc-

tions.

Your USB driver installation is now complete.

Go to “Chapter 7: Configure the PCs.”

1. With the Router powered up and connected to your PC’s USB port using a

USB cable, start up your PC in Windows 2000, and have the Router’s driver

disk available. Windows will notify you that the PC has found new hardware.

The Windows’ Hardware Wizard will then notify you that it is ready to start

installing the driver files on your PC, as shown in Figure 6-9. Click the Next

button.

2. Select Search for a suitable driver for my device (Recommended), as

shown in Figure 6-10, and click the Next button.

Installing the Windows 2000 Driver

Figure 6-9

Figure 6-10

Figure 6-8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFSR11 ver. 2 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Linksys BEFSR11 ver. 2 Manual

Product: