602198
30
Zoom out
Zoom in
Previous page
1/46
Next page
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Ready
51
Instant Broadband
Series
50
With Dynamic Routing you can enable the Gateway to automatically adjust to
physical changes in the network’s layout. The Gateway, using the RIP protocol,
determines the network packets’ route based on the fewest number of hops
between the source and the destination. The RIP protocol regularly broadcasts
routing information to other routers on the network. Select the RIP directions
and versions for the LAN and WAN sides.
RIP Direction
Determines the direction that RIP routes will be updated.
• None RIP is disabled.
Both The Gateway will incorporate received RIP information and send out
updated RIP information.
• In Only The Gateway will only incorporate received RIP information.
• Out Only The Gateway will only send out RIP information.
Dynamic Routing
Figure 6-21
Important: This is an Advanced Function. No changes should be made
to this tab without a thorough understanding of network concepts.
To add a server using Port Range Forwarding:
1. Enter the name of the application in the appropriate Customized
Applications field. This field is a description field only.
2. Next to the name of the application, enter the range of the external port(s)
used by the server or Internet application in the Ext. Port column. Check
with the Internet application software documentation for more information.
3. Enter the IP address of the server that you want the Internet users to be
able to access. To find the IP address, go to “Appendix D: Finding the
MAC Address and IP Address for Your Ethernet Adapter.
4. Configure as many entries as needed—the Gateway supports up to 11
ranges of ports. Click the Apply button and Continue button when you are
done.
To delete a server entry, enter 0 in the Ext. Port and IP Address fields.
To clear any values you’ve entered on any page, click Cancel and re-enter
information. To apply any settings you’ve altered on any page, click the Apply
button. Once all settings are correct, click Continue. For more information on
this tab, you can click the Help button.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFDSR41W ADSL Gateway at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFDSR41W ADSL Gateway in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info