602198
18
Zoom out
Zoom in
Previous page
1/46
Next page
ADSL Gateway with Modem / Router / 4-Port Switch / Wireless-Ready
• Encapsulation The Gateway supports five encapsulation modes: RFC
1483 Bridged, RFC 1483 Routed, RFC 2364 PPPoA, RFC2516 PPPoE,
and Bridged Mode Only. These modes can be selected from the drop-down
menu next to the Encapsulation setting. Each Setup screen and available
features will differ depending on what kind of connection mode you select.
Each mode is described on the following pages.
• Multiplexing The Gateway supports both VC and LLC multiplexing. Your
ISP will provide the correct selection for this setting.
27
Instant Broadband
Series
The Setup screen is the first screen you see when you access the web-based
utility. If you have already installed and set up the Gateway, you have already
seen this screen and properly configured each of the values.
• Host Name & Domain Name These fields allow you to supply a host and
domain name for the Gateway. Some ISPs require these names as identifi-
cation. You may have to check with your ISP to see if your broadband
Internet service has been configured with a host and domain name. In most
cases, leaving these fields blank will work.
Firmware Version This entry shows the version and date of the firmware
you are using. Future versions of the Gateway’s firmware will be posted and
available for download on the Linksys website at www.linksys.com.
Current Time The Gateway will try to reach an Internet timeserver and dis-
play the current time in this location. If a timesaver cannot be reached, this
will show the time elapsed since the Gateway was powered on.
• Time Zone Set your local time zone in this field. If your region participates
in Daylight Savings Time (DST), check the box next to Daylight Savings
Time.
• LAN IP Address and Subnet Mask The values for the Gateway’s IP
Address and Subnet Mask as seen on the internal LAN are shown here. The
default values are 192.168.1.1 for the Device IP Address and 255.255.255.0
for the Subnet Mask.
• Virtual Circuit ID These fields consist of two items: VPI (Virtual Path
Identifier) and VCI (Virtual Channel Identifier). Your ISP will provide the
correct settings for these fields.
VPI Enter the number provided by your ISP. The number will be in the
range of 0 to 255.
VCI Enter the number provided by your ISP. The number will be in the
range of 0 to 65535.
26
Note: After setup, you can test and see if the settings are correct by
successfully connecting to the Internet.
Figure 6-4
Setup
Note: The screen you see may vary depending on what kind of con-
nection mode you select.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFDSR41W ADSL Gateway at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFDSR41W ADSL Gateway in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info