IP Filtering Tab
This screen allows you to configure IP address filters for your Gateway.
To filter an IP address, enter the IP addresses into the Start Address and End
Address fields. Click the Enabled button to enable the changes.
Click the Apply button to apply any changes to the settings.
23
Cable Gateway
Instant Broadband
®
Series
Remote Config Management This feature allows you to manage the
Cable Gateway from a remote location,
via the Internet. Click Enable. To remote-
ly manage your Cable Gateway,. enter
http://<WAN IP Address>:8080 into the
browser of any PC on the Internet. Press
the Enter key.
Multicast Enable This feature allows for multiple transmis-
sions to specific recipients at the same
time. Select Enable to support the feature.
22
Figure 5-3
Note: Linksys recommends that you change the password for
your Cable Gateway if you enable Remote Config
Management.