602197
12
Zoom out
Zoom in
Previous page
1/43
Next page
Chapter 5:Using theCable
Gateway’s Web-based Utility
For your convenience, an administrative utility has been programmed into the
Cable Gateway. From this browser-based utility, you can view the Cable
Gateway’s current status and, when wireless functions are enabled, administer
the wireless settings. This chapter explains all of the functions in this utility.
1. Open your web browser, and
enter 192.168.0.1 into the web
browser’s Address field, as
shown in Figure 5-1. Then,
press the Enter key.
2. An Enter Network Password
window, similar to that shown
in Figure 5-2, appears. Leave
the User Name field empty,
and enter admin (the default
password) in lowercase letters
in the Password field. Then,
click the OK button. Don’t
check the box next to S
ave this
password in your password
list, because you should
change the password for better
network security.
The Utility screen will be displayed next in your browser. Located on the left
of your screen, you have five choices to navigate through the utility: Basic,
Advanced, Firewall, Status, and Wireless. When you click on any of these, you
will have a choice of tabs at the top of the screen. When you click Basic, you
have a choice of Setup and DHCP. When you click Advanced, you have a
choice of Options, IP Filtering, MAC Filtering, Port Filtering, Forwarding, Port
Triggers, DMZ Host. When you click Firewall, you have a choice of W e b
Filter and Event Log. When you click Status, you have a choice of Software,
Connection, Security, and Diagnostics. When you click Wireless, you
have a choice of Basic, Privacy, and Advanced.
17
Instant Broadband
®
Series
4. Select Internet Protocol (TCP/IP), and click the Properties button.
5. Select Obtain an IP address automatically. Once the new window
appears, click the OK button. Click the OK button again (or the Close but-
ton if any settings were changed) to complete the PC configuration.
6. Restart your computer.
Go to “Chapter 5: Using the Cable Gateway’s Web-based Utility”.
16
Cable Gateway
Accessing the Web-Based Utility
Figure 4-7
Figure 4-8
Figure 5-2
Figure 5-1
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFCMUH4 Cable Gateway at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFCMUH4 Cable Gateway in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info