602196

Linksys BEFCMU10 Cable Modem Manual

17
Zoom out
Zoom in
Previous page
1/30
Next page
13
Appendix A: Troubleshooting
Common Problems and Solutions
Cable Modem with USB and Ethernet Connections
Appendix A: Troubleshooting
This appendix provides solutions to problems that may occur during the installation and operation of the Cable
Modem. Read the description below to solve your problems. If you can't find an answer here, check the Linksys
website at www.linksys.com.
Common Problems and Solutions
1. I cannot access my e-mail or Internet service.
Go through this checklist until your problem is solved:
• Make sure all of your connections are secure.
1. The Ethernet cable should be inserted completely into both the computer’s network adapter and the
Ethernet port on the back panel of the Cable Modem.
2. If you are using the Cable Modem’s USB port, check the USB connections to the Cable Modem and
your PC.
3. Check all cables between your computer and the Cable Modem for frays, breaks, or exposed wiring.
4. Make sure your power adapter is properly plugged into both the Cable Modem and the electrical
outlet or surge protector. If the Cable Modem is properly connected, the Power and Cable LEDs on the
Cable Modem should be solidly lit. The Activity LED should be solid or flashing.
• Press the Reset button on the back panel of the Cable Modem. Using an object with a small tip, such as a
pen, push the button until you feel it click. Then try reconnecting to the Internet.
• Call your cable ISP to verify that their service is two-way. This Cable Modem is designed for use with two-
way cable networks.
• If you installed the Cable Modem using the Ethernet port, make sure the computer’s network adapter is
operating correctly. Make sure the adapter is listed in the Windows Device Manager and has no conflicts.
For more information, refer to Windows Help.
• Make sure TCP/IP is the default protocol used by your computer. For more information, refer to “Appendix
B: Windows Help.”
• If you are using a cable line splitter so you can connect the Cable Modem and a television at the same
time, remove the splitter and reconnect your cables so that the Cable Modem is connected directly to the
cable wall jack. Then try reconnecting to the Internet.
2. The Online LED never stops flashing.
Go through this checklist until your problem is solved:
• Make sure the Cable Modem’s MAC address has been registered with your cable ISP. In order for the
Cable Modem to work, you must call and have the ISP activate the Cable Modem by registering its MAC
address. You can find the MAC address on a label located on the Cable Modem’s bottom panel.
• Make sure the coaxial cable is firmly attached between the Cable Modem and the wall jack.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys BEFCMU10 Cable Modem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys BEFCMU10 Cable Modem in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info