602193
29
Zoom out
Zoom in
Previous page
1/87
Next page
23
Chapter 6: Configuring the ADSL2+ Gateway
The Setup - Advanced Routing Tab
ADSL2+ Gateway with VoIP
The Setup - Advanced Routing Tab
The Advanced Routing screen allows you to configure the NAT, dynamic routing, and static routing settings.
Advanced Routing
Operating Mode.
In this section, you will configure the Gateway’s general routing settings.
NAT. NAT is a security feature that is enabled by default. It enables the Gateway to translate IP addresses of your
local area network to a different IP address for the Internet. To disable NAT, click the Disabled option.
Dynamic Routing
With Dynamic Routing you can enable the Gateway to automatically adjust to physical changes in the network’s
layout. Using RIP, the Gateway determines the network packets’ route based on the fewest number of hops
between the source and the destination. The RIP protocol regularly broadcasts routing information to other
Gateways on the network.
RIP. If you have multiple routers, you may want to use the Routing Information Protocol (RIP) so the routers can
exchange routing information with each other. To use RIP, select the Enabled option. Otherwise, keep the default,
Disabled.
Transmit RIP Version. To transmit RIP messages, select the protocol you want: RIP1, RIP1-Compatible (RIP1
broadcasts and RIP2 multicasts), or RIP2. If you don’t want to transmit RIP messages, select None.
Receive RIP Version. To receive RIP messages, select the protocol you want: RIP1 or RIP2. If you don’t want to
receive RIP messages, select None.
Static Routing
If the Gateway is connected to more than one network, it may be necessary to set up a static route between
them. A static route is a pre-determined pathway that network information must travel to reach a specific host or
network. To create a static route, change the following settings:
Select set number. Select the number of the static route from the drop-down menu. The Gateway supports up to
20 static route entries. If you need to delete a route, then select the entry and click the Delete This Entry button.
F
i
g
u
r
e
6
-
1
4
:
A
d
v
a
n
c
e
d
R
o
u
t
i
n
g
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys AG310 ADSL2 plus Gateway with VOIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys AG310 ADSL2 plus Gateway with VOIP in the language / languages: English as an attachment in your email.

The manual is 12,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info