602192
41
Zoom out
Zoom in
Previous page
1/79
Next page
35
Chapter 5: Configuring the ADSL Gateway
The Administration Tab
ADSL Gateway
SNMP
SNMP is a popular network monitoring and management protocol. To enable SNMP, click Enabled. To disable
SNMP, click Disabled.
If enabled, then specify the IP address(es) allowed to have SNMP access. Select All to allow all IP addresses with
no restrictions, IP address to specify a single IP address, or IP range to specify a range of IP addresses.
Device Name. Enter the name of the Gateway.
SNMP V1/V2: Get Community. Enter the password that allows read-only access to the Gateway’s SNMP
information.
Set Community. Enter the password that allows read/write access to the Gateway’s SNMP information.
SNMP V3. Click Enable if you wish to manage the Gateway using SNMP version 3.
Rw User. Enter a name for the user who will have read/write access to the Gateway’s settings. The default
name is v3rwuser.
Authentication protocol and password. Select an authentication protocol and enter a password. It is
recommended that the password be at least eight characters long.
Privacy protocol and password. To enable encryption of SNMP version 3 communications, select CBC-DES
and enter a password. If encryption is not desired, select None.
Trap Management: Trap to. Enter the IP address of the computer that will receive trap messages.
UPnP
UPnP allows Windows Me and XP to automatically configure the Gateway for various Internet applications, such
as gaming and videoconferencing.
UPnP. To enable UPnP, click Enable. Otherwise, click Disable.
Please select a PVC connection to bind. Select the number of the PVC over which the applications requiring
UPnP will run.
IGMP-Proxy
If your multimedia application or device is not working properly behind the Gateway, then you can enable IGMP-
Proxy to allow multicast traffic through the Gateway.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys AG300 ADSL Gateway at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys AG300 ADSL Gateway in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info