602192

Linksys AG300 ADSL Gateway Manual

27
Zoom out
Zoom in
Previous page
1/79
Next page
21
Chapter 5: Configuring the ADSL Gateway
The Setup Tab
ADSL Gateway
• Subnet Mask. Enter the Subnet Mask (also known as the Network Mask), which determines which portion
of an IP address is the network portion, and which portion is the host portion.
• Gateway. Enter the IP address of the gateway device that allows for contact between the Gateway and the
remote network or host.
• Hop Count. Hop Count is the number of hops to each node until the destination is reached (16 hops
maximum). Enter the Hop Count in the field provided.
• Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed
through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and
Interface are displayed. Click the Refresh button to update the information. Click the Close button to return to
the previous screen.
PVC Routing Policy
If you have multiple PVCs, click the PVC Routing Setting button to configure which outgoing traffic will be routed
over which PVC. A window titled PVC Selection Table will appear.
Please select Active Connection. Open this drop-down list and specify the PVC for which you will select traffic.
Traffic can be selected on the basis of any of the following criteria, alone or in combination:
• Destination (IP address and address mask)
• Source (IP address and address mask, or MAC address)
• Transport protocol (TCP, UDP, or All)
• Destination port and/or source port (if protocol is set to TCP or UDP)
• Presence of a specified IEEE 802.1D user priority marker
• IEEE 802.3 Type/Length value (the value in the 13th and 14th octets of an Ethernet frame)
• Presence of a specified IEEE 802.1Q virtual LAN (VLAN) ID
• Packet length between specified minimum and maximum numbers of octets.
• Presence of a specified DSCP (Diffserv Code Point) value (one kind of QoS marker)
Figure 5-15: Routing Table
Figure 5-16: PVC Routing
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys AG300 ADSL Gateway at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys AG300 ADSL Gateway in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info