602191
31
Zoom out
Zoom in
Previous page
1/80
Next page
26
Chapter 5: Configuring the Gateway
The Security Tab
ADSL2 Gateway with 4-Port Switch
Key Life Time. In the Key Lifetime field, you may optionally select to have the key expire at the end of a time
period of your choosing. Enter the number of seconds you’d like the key to be used until a re-key negotiation
between each endpoint is completed.
Phase 2
Encryption. The encryption method selected in Phase 1 will be displayed.
Authentication. The authentication method selected in Phase 1 will be displayed.
PFS. The status of PFS will be displayed.
Group. There are two Diffie-Hellman Groups to choose from: 768-bit and 1024-bit. Diffie-Hellman refers to a
cryptographic technique that uses public and private keys for encryption and decryption.
Key Life Time. In the Key Lifetime field, you may select to have the key expire at the end of a time period of
your choosing. Enter the number of seconds you’d like the key to be used until a re-key negotiation between
each endpoint is completed.
Other Setting
NetBIOS broadcast. Check the box next to NetBIOS broadcast to enable NetBIOS traffic to pass through the
VPN tunnel.
Anti-replay. Check the box next to Anti-replay to enable the Anti-replay protection. This feature keeps track of
sequence numbers as packets arrive, ensuring security at the IP packet-level.
Keep-Alive. If you select this option, the Gateway will periodically check your Internet connection. If you are
disconnected, then the Gateway will automatically re-establish your connection.
Check this box to block unauthorized IP addresses. Enter in the field to specify how many times IKE must fail
before blocking that unauthorized IP address. Enter the length of time that you specify (in seconds) in the
field.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. For further help on this tab, click the Help button.
Figure 5-19: Advanced VPN Tunnel Setup
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys AG241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys AG241 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info