602191
20
Zoom out
Zoom in
Previous page
1/80
Next page
15
Chapter 5: Configuring the Gateway
How to Access the Web-based Utility
ADSL2 Gateway with 4-Port Switch
How to Access the Web-based Utility
To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Gateway’s default
IP address, 192.168.1.1, in the Address field. Then press Enter.
A password request page, shown in Figure 5-1 will appear. (non-Windows XP users will see a similar screen.)
Enter admin (the default user name) in the User Name field, and enter admin (the default password) in the
Password field. Then click the OK button.
The Setup Tab
The Basic Setup Tab
The first screen that appears is the Basic Setup tab. This tab allows you to change the Gateway's general
settings. Change these settings as described here and click the Save Settings button to save your changes or
Cancel Changes to cancel your changes.
Internet Setup
PVC Connection. Select a PVC connection number from the drop-down menu. Then, select the Enable Now to
enable the connection.
VC Settings. Virtual Circuits (VPI and VCI): These fields consist of two items: VPI (Virtual Path Identifier) and VCI
(Virtual Channel Identifier). Your ISP will provide the correct settings for these fields.
Multiplexing: Select LLC or VC , depending on your ISP.
QOS Type: Select from the drop-down menu: CBR, Continuous Bit Rate to specify fixed bandwidth for
voice or data traffic; UBR, Unspecific Bit Rate for application that are none-time sensitive, such as email;
or VBR, Variable Bite Rate for Bursty traffic and bandwidth sharing with other application.
Pcr Rate: Peak Cell Rate, divide the DSL line rate by 424 to find the PCR to get the maximum rate the
sender can send cells. Enter the rate in the field (if required by your service provider).
Scr Rate: Sustain Cell Rate, sets the average cell rate that can be transmitted. SCR normally less than
PCR. Enter the rate in the field (if required by your service provider).
Autodetect: Select Enable to have the settings automatically entered or Disable to enter the values
manually.
Virtual Circuit: Enter the VPI and VCi ranges in the fields.
Figure 5-2: Basic Setup Tab
Figure 5-1: Password Screen
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys AG241 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys AG241 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info