602180
31
Zoom out
Zoom in
Previous page
1/46
Next page
25
Appendix A: Troubleshooting
Frequently Asked Questions
ADSL2MUE Modem with USB and Ethernet
Does the Gateway support any operating system other than Windows 98SE, Windows Millennium,
Windows 2000, or Windows XP?
Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of
any non-Windows operating systems.
The web page hangs; downloads are corrupt, or nothing but junk characters are being displayed on the
screen. What do I need to do?
Force your Ethernet adapter to 10Mbps or half duplex mode, and turn off the “Auto-negotiate” feature of your
Ethernet adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet adapters
Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our website at
www.linksys.com/international or www.linksys.com for more information.
If all else fails in the installation, what can I do?
Reset the Modem by holding down the reset button until the Power LED fully turns on and off. Reset your DSL
modem by powering the unit off and then on. Obtain and flash the latest firmware release that is readily available
on the Linksys website, www.linksys.com/international.
How will I be notified of new Modem firmware upgrades?
All Linksys firmware upgrades are posted on the Linksys website at www.linksys.com/international, where they
can be downloaded for free. To upgrade the Modem’s firmware, use the Administration tab of the Modem’s web-
based utility. If the Modem’s Internet connection is working well, there is no need to download a newer firmware
version, unless that version contains new features that you would like to use.
Will the Modem function in a Macintosh environment?
Yes, but the Modem’s setup pages are accessible only through Internet Explorer 5.0 or Netscape Navigator 6.0 or
higher for Macintosh.
I am not able to get the web configuration screen for the Modem. What can I do?
You can set your PC to a static IP Address.
Is the Modem cross-platform compatible?
Any platform that supports Ethernet and TCP/IP is compatible with the Modem.
How can I check whether I have static or DHCP IP Addresses?
Consult your ISP to obtain this information.
Can the Modem act as my DHCP server?
Yes. The Modem has DHCP server software built-in.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys ADSL2MUE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys ADSL2MUE in the language / languages: English as an attachment in your email.

The manual is 4,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info