693636
14
Zoom out
Zoom in
Previous page
1/18
Next page
Setup: Utilities Options
The top portion of the screen lists the Flash Memory and USB Firmware
versions currently installed on your POD HD500X device. You can use
Line6Monkeytoeasilycheckforandinstallallavailableupdates.The
lowerportionofthescreenoersfouroptions,adjustableusingtheMulti-
functionKnobs1-4.
Knob 1 - This option congures the function of POD HD500X foot-
switches FS5 through FS8. This setting is “global” (persists regardless
of the current preset). Choose FS 5-8 for “Pedalboard Mode,” where
thesefootswitchestoggleFXblocks 5-8On/O. (WhileinPedalboard
Mode,theA,B,C,DfunctionsarestillaccessiblebypressingtheBank
Up/Downfootswitches.)ChooseABCDfor“PresetMode,”wherethese
footswitches act as Preset Channel switches.
Knob 2 - Allows you to have the LCD screen momentarily display the
Amp Tone Knob settings whenever adjusting any physical amp knob.
This is a global setting.
Knob 3 - When the LOOPER footswitch is toggled on to engage Looper
Mode,thePerformance Viewscreenautomaticallychanges todisplay
Looper footswitch functions. This is a global setting. The two selections
hereoerthefollowingbehaviorswhenLooperModeisactive:All Views
shows the Looper controls in the LCD regardless of the currently selected
View. Performance View shows the Looper screen as the Performance
View screen (and allows the 3 Home View screens to still be displayed
when toggling the VIEW button).
Knob 4:Whensetto“On”allowstheechorepeatsand/ordecayofDelay
andReverbFXtocontinuewhentheModelistoggledo-thisaects
theFXLoop block as well...how cool! Withthe Trails option “O” the
decayismutedinstantlywhentogglingtheModelo.NotethattheTrails
feature does not provide a “spillover” of the FX decay when changing
Presets. The Trails setting is saved per Preset.
Setup: Utilities Options
The adjustable options at the bottom of the screen are as follows - all are
global settings.
Knob 1 - Adjusts the contrast of the POD HD500X LCD screen.
Knob 2 -Choose“On”tohavetheLEDlightfortheTAPfootswitchash
to indicate the current Tap Tempo value.
Knob 3 - The AC hum typical of the AC Vacuum Tube Heater component
isanimportantpartofthetonalityofatubeamplier.We’veprovidedthe
optionheretosettheACRatetomatchthatoftheUSA(60Hz)orUK
(50Hz)frequencyfor authenticity andcompatibility whenfeeding POD
HD500X to a tube amp plugged in to either type of power source.
Setup: Input Options
Use this page to choose among the various hardware inputs as a source
for your patch.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD HD500X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD HD500X in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD HD500X

Line 6 POD HD500X User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info