693631
78
Zoom out
Zoom in
Previous page
1/82
Next page
POD Farm 2 Basic User Guide - Standalone Operation
4•7
Send Source Menus
Output Level Fader
+18 dB Boost button
Output Level Meter
Send Source Menus
Select the audio Source you want fed independently to each Record Send. If POD Farm 2 is in Single
Tone mode, the options available in the Source menus are:
Tone A - The fully processed signal fed from Tone A.
Tone A (semi) - A signal from Tone A which is processed only by any existing Amp/Cab/
Preamp and effects models positioned to the left of them (i.e. - “Pre” positioned effects).
Dry - A completely unprocessed signal from the Tone A assigned input source.
If POD Farm 2 is in Dual Tone mode, the options available in the Send Source menus are:
Tone A - The fully processed signal fed from Tone A.
Tone B - The fully processed signal fed from Tone B.
Tone A+B - The fully processed signals fed from both Tone A & B.
Dry - A completely unprocessed signal from the Tone A & B assigned input sources.
Record Send Level Controls
Use the Level Fader to adjust the output of each Record Send. This is how you adjust the level
of the signal that gets recorded into your audio software.
Use the Output Level Meter to gauge your levels. The red clip indicator will light up if your
level is too high - clipping should always be avoided to produce good quality recordings!
Use the +18 dB Boost button if your Send signal is not hot enough. When this button is lit, an
18 dB gain boost is applied to the Record Send output signal. Watch the meters and adjust the
Level Slider for nice, hot signal.
Record Send Behaviors
It is important to note that, when in Dual Tone mode, the Record Send Source menu selections also
result in slightly different interactions between the Tone A & B and Record Send Mixer controls.
When a Record Send Source menu is set to “Tone A+B”, the Tone A and Tone B Output Level
Fader, Balance Knob and Mute buttons all affect what is fed to this Record Send (as well as what
you hear as the POD Farm 2 ToneDirect Monitoring signal).
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD Farm 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD Farm 2 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD Farm 2

Line 6 POD Farm 2 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info