697394

LightPro Avior 181S Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
Avior
User manual
Thank you for purchasing the Lightpro Avior.
This document contains the required information for
correct, efcient, and safe use of the product. Consult
the general manual of the Lightpro 12-volt system
and the user manual of your transformer for more
information about the set up and connection of your
light plan.
Read the information in this manual carefully before
using the product. Keep this manual near the product
for consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Avior is an LED spot for outdoor use. The
xture can be installed on a xed underground with
the included screws, or be placed in the ground with
the included spike. This product may only be used
as outdoor lighting in combination with the Lightpro
12-volt system. Any alterations made to the product
may have consequences for the safety, warranty, and
correct functioning of the product and/or other parts
of the system.
Specications
Product Lightpro Avior
Article number
181S
Power (max.) 16W
Luminous ux 150 – 1500 lm
Dimensions (H x W x D)
125 x 180 x 68 mm
Protection class IP44
Ambient temperature -20°C to 50°C
Cable length
1m
Dimmable Yes, with built-in dimmer
INSTALLATION
Packaging content
[Figure A]
1. Fixture Avior
2. Ground spike
3. Screws
4. Plugs
5. Lightpro connector
6. Hex key
Check if all parts are present in the packaging. For
questions about parts, service, and any complaints or
other remarks, you can always contact us. E-mail: info@
lightpro.nl
Option 1: placement on a xed underground or
mounting to a wall [Figure B]
1. Remove the screw from the base using the included
hex key (Figure A [6]).
2. Remove the xture from the base.
[Figure C]
• Install the base onto the underground with the
included screws.
If necessary, drill a hole in the underground and use
the included plugs.
[Figure D]
1. Place the xture in the base.
2. Place the screw in the base.
3. Put the xture in the desired position.
4. Fasten the screw using the included hex key
(Figure A [6]).
Option 2: placement in the ground
[Figure E]
1. Place the spike underneath the base.
2. Properly fasten the spike.
3. Put the xture in the desired position.
4. Fasten the screw using the included hex key
(Figure A [6]).
5. Place the xture in the ground.
DIMMER FUNCTION
The xture is equipped with a built-in dimmer. The
light output can be set to 6 different levels.
[Figure F]
• Push the button to set the desired light output.
GB
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LightPro Avior 181S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LightPro Avior 181S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info