600894
28
Zoom out
Zoom in
Previous page
1/76
Next page
28
USING THE DOOR CONTROL
SYNCHRONIZETHEDOORCONTROL
To synchronize the door control to the garage door opener, pressthe push bar until the garage door
opener activates(it may take up to 3 presses).Testthe door control by pressing the push bar,each
press ofthe push bar will activate the garage door opener.
Push Bar
LIGHT
button
Screen
Motion
Sensor
Navigation
Buttons
PUSH BAR
Press the push bar to open or close the door.
NAVIGATION BUTTONS
Use the navigation buttons to make selections and program features.
LIGHT BUTTON
Press the LIGHTbutton to turn the garage door opener lights on or off.When the lights are turned on
they will stay on until the LIGHT button ispressed again, or until the garage door opener isactivated.
Once the garage door opener isactivated the lights will turn offafter the specified period of time (the
factory setting is 4-1/2 minutes). The LIGHT button will not control the lights when the door is in motion.
The duration of the lighttiming can be adjusted by accessing the menu using the navigation buttons.
SCREEN
The screen will display the time and temperature until the menu button is pressed, and then itwill
display the menu options. Ifthere is a problem with the garage door opener the screen will display the
Diagnostic Code. Refer to the Troubleshooting section.
The following features are accessible through the screen using the navigation buttons:
LEARN A DEVICE
Any compatible remote controls, wireless keyless entry, or MyQ
®
accessoriescan be programmed to
the garage door opener by accessing the menu and using the navigation buttons.
LOCK
The LOCK feature is designed to preventactivation of the garage door opener from remote controls
while still allowing activation from the door control and keyless entry.This feature is useful for added
peace ofmind when the home is empty (i.e. vacation).
TIMER-TO-CLOSE (TTC)
DO NOT enable TTC if operating a one-piece door. TTC isto be used ONLY with sectional doors.
Factory defaultissetto off.TTC can be setto automatically close your garage door from the fully open
position after a specified period oftime (1, 5, 10 minute intervals). The garage door opener will Beep
and the lights will Flash before closing the door. The screen on the door control can display the statusof
the TTC. TTCWILL NOT workif the garage door opener is operating by battery power or ifthe safety
reversing sensors are misaligned. Thisfeature is NOT intended to be the primary method of closing the
door.A keyless entry should be installed inthe event of an accidental lock out when usingthis
feature.
NOTE: Before enabling the TTC for the first time, or if you experience a power outage, cycle the garage
door opener open and closed to allow the TTC to set.
AUTOMATIC LIGHT
Motion Sensor
Factory defaultissetto on. Thisfeature automatically turns on the garage door opener lights when
motion is sensed. The lightswill come on for the setperiod oftime,then shutoff. Ifusing the garage door
opener light asa work light disable the motion sensor,otherwise the light will turn offautomaticallyif you
are beyond the range of the sensor.
Light Feature
The lights will turn on when someone enters through the open garage door and the safetyreversing
sensor infrared beam is broken.
MAINTENANCE ALERT (MAS)
This feature assists the homeowner in ensuring the garage door opener system staysin good working
condition. A maintenance alertmessage will display on the screen indicating the garage door opener
maybe in need ofmaintenance. The factory setting for the MASfeature is off and can be activated at
time of installation.Contact your installing dealer for service.
Door Control
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liftmaster 8587 Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liftmaster 8587 Elite in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info