600894
21
Zoom out
Zoom in
Previous page
1/76
Next page
21
1 Connect Power
To preventpossible SERIOUS INJURY or
DEATHfrom electrocution or fire:
Be sure power is NOT connected to the
opener, and disconnect power to circuit
BEFORE removing cover to establish
permanent wiring connection.
Garage door installation and wiring MUST
be in compliance with ALL local electrical
and building codes.
NEVER use an extension cord, 2-wire
adapter,or change plug in any wayto make
it fitoutlet. Be sure the opener is grounded.
To avoid installation difficulties, do not activate the garage door openerat this time.
To reduce the riskofelectricshock,your garage door opener has a grounding type plug with a third
grounding pin.Thisplug will only fit into a grounding type outlet.If the plug doesn’t fit into your outlet,
contact a qualified electrician to install the proper outlet.
THERE ARE TWO OPTIONS FOR CONNECTINGPOWER:
OPTION A
TYPICAL WIRING
1.1A Plug in the garage door opener into a grounded outlet.
1.2A DO NOT run garage door opener atthis time.
TYPICAL WIRING
Ground Tab
Green
Ground
Screw
Ground
Wire
White Wire
PERMANENT WIRING
Black
Wire
Black
Wire
OPTION B
PERMANENT WIRING
If permanent wiring is requiredby your local code, refer to the following procedure.
To make a permanent connectionthrough the 7/8 inch hole in the topof the motor unit (according to
local code):
1.1B Remove the motor unit cover screws and setthe cover aside.
1.2B Remove the attached 3-prong cord.
1.3B Connectthe black (line) wire to the screw on the brass terminal;the white (neutral) wire to the
screw on the silver terminal; and the ground wire to the green ground screw.The opener must
be grounded.
1.4B Reinstall the cover.
Power
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liftmaster 8587 Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liftmaster 8587 Elite in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info