600894
18
Zoom out
Zoom in
Previous page
1/76
Next page
Install the Protector System
®
1 Install the Safety Reversing Sensors
The safetyreversing sensors can be attached to the door track,the wall, or the floor. Ifthe door track will not support the sensor bracketa wall installation is recommended. Choose one of the following installations.
HARDWARE
Carriage Bolt
1/4"-20x1/2"
Wing Nut
1/4"-20
Lag Screw 1/4"x1-1/2"
Hex Bolt 1/4"-20x5/8"
Lock Nut 1/4"-20
OPTION A
DOOR TRACK INSTALLATION
1.1A Slide the curved arms of the sensor
bracketaround the edge of the door
track.Snap into place so that the
sensor bracketisflush against the
track.
1.2A Slide the carriage bolt into the sloton
each sensor.
Carriage Bolt
1/4" - 20 x 1/2"
1.3A Insertthe bolt through the hole in the sensor
bracketand attach with the wing nut. The lenses
on both sensors should pointtoward each other.
Make sure the lens is not obstructed bythe
sensor bracket.
Wing Nut
1/4" - 20
OPTION B WALLINSTALLATION
If additional clearance isneeded an extension bracket(notprovided) or wood blockscan be used. Make sure each bracket has the same amount of clearance so they will align correctly.
1.1B Position the sensor bracketagainstthe
wall with the curved arms facing the
door.Make sure there is enough
clearance for the beam to be
unobstructed. Mark holes.
(not provided)
1.2B Drill 3/16 inch pilotholes for each sensor
bracketand attach the sensor brackets
to the wall using lag screws(not
provided).
In
side
G
a
rage
Wal
l
(not provided)
1.3B Slide the carriage boltinto the sloton
each sensor.
Lens
Carriage Bolt
1/4" - 20 x 1/2"
1.4B
Insert the boltthrough the hole in the sensor
bracketand attach with the wing nut. The lenses
on both sensors should pointtoward each
other. Make sure the lensisnot obstructed by
the sensor bracket.
Wing Nut
1/4" - 20
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liftmaster 8587 Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liftmaster 8587 Elite in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info