600892
35
Zoom out
Zoom in
Previous page
1/41
Next page
35
Your garage door opener isprogrammed with self-diagnosticcapabilities. The UP and DOWN arrows on the garage door opener flash the diagnosticcodes.
DIAGNOSTICCODE SYMPTOM SOLUTION
Up Arrow
Flash(es)
Down Arrow
Flash(es)
1 1 The garage door opener will not close and the light
bulbs flash.
Safety sensorsare notinstalled, connected or wires maybe cut. Inspect sensor wires for a
disconnected or cutwire.
1 2 The garage door opener will not close and the light
bulbs flash.
There isa short or reversed wire for the safetysensors.Inspect safetysensor wire at all staple points
and connection points and replace wire or correct as needed.
1 3 The door control will not function. The wires for the door control are shorted or the door control is faulty. Inspect safety sensor wire at all
staple points and connection points and replace wire or correctasneeded.
1 4 The garage door opener will not close and the light
bulbs flash.
Safety sensorsare misaligned or were momentarily obstructed. Realign both sensors to ensure both
LEDs are steady and notflickering.Make sure nothing is hanging or mounted on the door that would
interruptthe sensors path while closing.
1 5 Door moves 6-8" stopsor reverses. Manuallyopen and close the door. Checkfor binding or obstructions,such as a broken spring or
door lock, correctas needed. Checkwiring connections attravel module and at the logicboard.
Replace travel module if necessary.
No movement,only a single click. Manually open and close the door.Checkfor binding or obstructions,such as a broken spring or
door lock, correctas needed. Replace logicboard if necessary.
Opener hums for 1-2 seconds no movement. Manuallyopen and close the door. Checkfor binding or obstructions,such as a broken spring or
door lock, correctas needed. Replace motor ifnecessary.
1 6 Door coast after it has come to a complete stop. Program travel to coasting position or have door balanced by a trained technician.
2 1-5 No movement or sound. Replace logicboard.
3 2 Unable to set the travel or retain position. Check travel module for proper assembly, replace if necessary.
3 3 The battery statusLED* isconstantlyflashing green. Battery backup charging circuiterror, replace logicboard. *(if applicable)
Troubleshooting
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liftmaster 8550 Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liftmaster 8550 Elite in the language / languages: English as an attachment in your email.

The manual is 5,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info