600889
27
Zoom out
Zoom in
Previous page
1/36
Next page
27
Programming
Internet Gateway (Not Provided)
The LiftMaster
®
Internet Gateway gives you control of your garage door from your internet
connected computer or mobile device. You must have your internet gateway registered to
your customer account at www.myliftmaster.com in order to use it with the MyQ
®
Control
Panel. Go to www.myliftmaster.com and follow the instructions to create an account and
register your device if you have not already.
To program your MyQ
®
Control Panel to the LiftMaster
®
Internet Gateway:
1. Go to www.myliftmaster.com from a computer or mobile device.
2. Click on “Manage Places>Add New Device>Garage Door Opener” and follow the
directions.
3. Once you click ADD you have 3 minutes to press the LEARN button two times on the
MyQ
®
control panel. The red learn LED will turn on.
4. The red learn LED will turn off when programming is complete. Once the control
panel is learned, it will appear on your screen. You can then name the device (e.g., My
Control Panel, etc.).
IMPORTANT NOTE: Model 580LM Alternate Power Supply may be installed if an outlet
is not located near the garage door opener. MyQ
®
light controls will continue to work
however all other MyQ
®
devices (Internet Gateway) and TTC WILL NOT work if using the
Model 580LM Alternate Power Supply. If you would like to use these features, contact an
electrician to install an outlet near the garage door opener.
Model 828LM
LiftMaster
®
Internet Gateway
www.myliftmaster.com
To Erase All Codes From the Door Control (MyQ
®
Control
Panel) Memory
Erase all remote controls and keyless entries:
1. Press and hold the LEARN button on the control panel until the red learn LED goes
out (approximately 6 seconds). All remote control and keyless entry codes are now
erased. Reprogram any compatible accessory you wish to use.
Erase all devices (including MyQ
®
enabled accessories):
1. Press and hold the LEARN button on the control panel until the red learn LED goes out
(approximately 6 seconds).
2. Immediately press and hold the LEARN button again until the red learn LED goes out.
All codes are now erased. Reprogram any compatible accessory you wish to use.
Red Learn
LED
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liftmaster 8500 Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liftmaster 8500 Elite in the language / languages: English as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info