600890
10
Zoom out
Zoom in
Previous page
1/72
Next page
9
Installation
6 Install the Light Bulbs
To preventpossible OVERHEATING ofthe endpanel or lightsocket:
l
DO NOT use short neck or specialty light bulbs.
l
DO NOT use halogen bulbs. Use ONLY incandescent.
To preventdamage to the opener:
l
DO NOT use bulbs larger than 100W.
l
ONLY use A19 size bulbs.
1. Press the release tabs on both sides of lens. Gently rotate lens backand downward until the
lenshinge is in the fully open position.Do notremove the lens.
2. Install a 100 watt maximum lightbulb in each socket.Light bulb size should be A19, standard
neckonly. The lightswill turn ON and remain litfor approximately 4-1/2 minuteswhen power is
connected.Then the lights will turn OFF.
3. Reverse the procedure to close the lens.
NOTE: If the bulbs burn out prematurely due to vibration, replace with A19, standard neck garage door
opener bulbs. The use of short neck or specialty light bulbs may overheat the endpanel or light socket.
100 Watt (Max)
Standard Light Bulb
100 Watt
(Max) Standard
Light Bulb
Release Tab
Lens Hinge
7 Attach the Emergency Release Rope and Handle
To preventpossible SERIOUS INJURY or DEATHfrom a falling garage door:
l
If possible,use emergency release handle to disengage trolley ONLY when garage door is
CLOSED. Weak or broken springs or unbalanced door could resultin an open door falling
rapidly and/or unexpectedly.
l
NEVER use emergency release handle unless garage doorway is clear of persons and
obstructions.
l
NEVER use handle to pull door open or closed.If rope knot becomes untied, you could fall.
1. Insert one end of the emergency release rope through the handle. Make sure that “NOTICE is
rightside up.Tie a knot atleast1 inch (2.5 cm) from the end of the emergencyrelease rope.
2. Insert the other end of the emergency release rope through the hole in the trolley release arm.
Mount the emergencyrelease within reach, but atleast 6 feet(1.83 m) above the floor,
avoiding contact with vehicles to preventaccidental release and secure with a knot.
NOTE: If it is necessary to cut the emergency release rope, seal the cut end with a match or lighter to
prevent unraveling. Ensure the emergency release rope and handle are above the top of all vehicles to
avoid entanglement.
Trolley
Release Arm
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liftmaster 8365-267 Premium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liftmaster 8365-267 Premium in the language / languages: English as an attachment in your email.

The manual is 8,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info