765152
32
Zoom out
Zoom in
Previous page
1/34
Next page
32
Engineering Mode
Press STOP and then speed up to enter the Engineering Mode. You can press Enter / Mode to switch
setup screens. The table below shows the sequence setup screens.
Engineering Function Information viewed on screen
Press and hold STOP and then Speed for 3 seconds to enter
Engineering Mode. The rst screen show the software versions.
Software Ver.
H = 0010 F = 0109
016 11.14 400
Press Enter to set up the units of measurement in metric (SI) or in
English (EN).
Press Speed / Incline UP / DOWN to change.
Select the units EN or SI
Press Enter for pause time
This allows you to set the amount of time the treadmill will be
paused prior to automatically resetting. The choices are 90,180, or
300 seconds as shown in the time window.
Select the pause time
90, 180, or 300 seconds
Press Enter for Distance
This is the total distance the treadmill has been run in Miles or
Kilometers depending on what mode the treadmills is in.
Total Distance
0 000
Press Enter for Workout Time
This is the total number of hours the treadmill has been used.
Total Hours
0 000
Press Enter for Warm-Up option On or O
Press Enter again to return to standby mode
TR8000i
Engineering Function Information viewed on screen
Press and hold STOP and then Speed for 3 seconds to enter Engineering
Mode. The rst screen show the software versions.
Engineering Mode
H = 002 F = C813
016 11.09 600
Press Enter
This for turning the Intelli-Guard on and o. Intelli-Guard
automatically pauses the unit if it detects the treadmill is not being walked
on. Press Speed / Incline UP / DOWN buttons to change between on and o
Intelli-Guard
On or O
Press Enter to set up the units of measurement in metric (SI) or in English
(EN).
Press Speed / Incline UP / DOWN to change.
Select the units
EN or SI
Press Enter for pause time
This allows you to set the amount of time the treadmill will be paused prior
to automatically resetting. The choices are 90,180, or 300 seconds as shown
in the time window.
Select the pause time
90, 180, or 300 seconds
Press Enter for Distance
This is the total distance the treadmill has been run in Miles or Kilometers
depending on what mode the treadmills is in.
Total Distance
0 000
Press Enter for Workout Time
This is the total number of hours the treadmill has been used.
Total Hours
0 000
Press Enter for Warm-Up option On or O
Press Enter again to return to standby mode
TR7000i
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lifespan TR8000i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lifespan TR8000i in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info