765151
25
Zoom out
Zoom in
Previous page
1/34
Next page
25
TR7000i/TR8000i
Treadmill
Operating Your Treadmill (continued)
Note: To use the Heart Rate Control programs the treadmill needs to receive your heart rate throughout the
entire workout either through using the grip pulse pads or a chest strap heart rate transmitter.
HRC – Constant:
The Constant program lets you select a single heart rate that you want to maintain throughout your
workout and the treadmill will maintain this heart rate for you by either adjusting the speed or incline.
After selecting the Constant Heart Rate program the next selection option will be Incline Mode or Speed
Mode. Select which mode you prefer and the treadmill will adjust the speed or incline every 10 seconds
to keep you at your selected heart rate level. For instance, if you select the incline mode there will be a
3 minute warm up and then the incline will start to adjust each 10 seconds to obtain and maintain your
target heart rate. You choose the speed that you want the belt to run and the treadmill will control the
incline. Typically for Weight Loss set the target heart rate at 65% of your predicted maximum heart rate
and for Cardio Training set the target at 80% of your predicted maximum.
To use this program:
1. Select HRC Constant – Use the UP / DOWN arrow keys to select the HRC Constant program. Press
the ENTER button to select.
2. Select Program Mode – Select either the Incline Control Mode or the Speed Control Mode using
the UP/DOWN arrow keys. Press ENTER.
3. Set Time – Set the program TIME using the UP / DOWN arrow keys. Press ENTER. Remember that
the program will include 3 minutes of warm-up.
4. Set Weight – Enter your WEIGHT using the UP / DOWN arrow keys. Press ENTER.
5. Set Age – Enter your age using the UP / DOWN arrow keys. Press ENTER.
6. Set Target Heart Rate – Set your target heart rate using the UP / DOWN arrow keys. Press ENTER.
7. Press the START button to begin your workout.
HRC – Interval:
The Interval program is designed to help you increase your aerobic endurance and improve hear rate
recover. This program lets you select a LOW or recover target heart rate and a HIGH target. After a 3
minutes warm-up the console will adjust the speed or incline, which ever you select, every 10 seconds
to maintain your LOW target to 2 minutes. Then the console will adjust the speed or incline to raise your
heart rate to the HIGH target that you selected and once again keep it at this level for 2 minutes and then
repeat the process until the end of the workout. It is recommended that you set the workout time to 20
minutes or higher to use this program eectively.
To use this program:
1. Select HRC Interval – Use the UP / DOWN arrow keys to select the HRC Interval program. Press
the ENTER button to select.
2. Select Program Mode – Select either the Incline Control Mode or the Speed Control Mode using
the UP / DOWN arrow keys. Press ENTER.
3. Set Time – Set the program TIME using the UP / DOWN arrow keys. Press ENTER. Remember that
the program will include 3 minutes of warm-up.
4. Set Weight – Enter your WEIGHT using the UP / DOWN arrow keys. Press ENTER.
5. Set Age – Enter your age using the UP / DOWN arrow keys. Press ENTER.
6. Set HIGH Target Heart Rate – Set your HIGH interval training rate using the UP / DOWN arrow
keys. Press ENTER.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lifespan TR7000i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lifespan TR7000i in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info