669735
13
Zoom out
Zoom in
Previous page
1/21
Next page
26
27
Treadmill Desk Console Overview
Starting the Treadmill Desk
1. Turn the On/O switch located on the front right corner of the
treadmill to the on position.
2. Make sure the safety key is installed on the console.
3. The current user weight will be ashing on the display panel. Adjust
your weight to obtain accurate calorie calculations.
4. Press the Start button to begin your workout. The console will start
counting up from 00:00.
5. Press the Up/Down buttons to adjust speed.
NOTE: The display will show “----“ if the safety key is not installed.
NOTE: The steps are counted normally from 1 to 9,999 steps. After
9,999 steps, the display format changes to accommodate more than
four digits. Take the number shown in the display and add a zero to
the right for the correct number of steps.
Below are examples of what the display will read and what those
numbers mean:
1001 = 10,010 steps 1005 = 10,050 steps 1100 = 11,000 steps
Console Buttons
1. Start/On – If the console is in sleep mode, press and hold this button
for three seconds to turn the console on. Once the console is turned
on, press to start the treadmill.
2. Enter/Mode – Press to switch between display readings (time, steps,
calories, distance, and speed). Holding the Enter/Mode button will
initiate a scan mode that rotates between display readouts every
ve seconds. Press the button again to exit the scan mode.
3. Stop/Pause – Press to pause your workout. This will maintain your
current workout data. To reset the console and current workout data,
press and hold the Stop/Pause button for three seconds.
4. – Press to adjust your weight during setup mode or to change
the treadmill speed during a workout.
5. Bluetooth – Press to turn on Bluetooth to pair with a personal
computer.
Treadmill Desk Console Overview
DT-5 and DT-7
DT-3
NOTE: Not all personal computers have a Bluetooth module. A
Bluetooth adaptor can be purchased to work with your personal
computer.
5
5
1
1
2
2
3
4
4
3
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lifespan C3-DT7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lifespan C3-DT7 in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info