765146
28
Zoom out
Zoom in
Previous page
1/37
Next page
28
BOOST
11. TROUBLE SHOOTING GUIDE
Error/Code
Description
Possible Solutions
Computer not
functioning after
connecting power
a. Please check if the overload protect jump, if it has, please press
it, let it continue operation.
b. Ensure the wires of the power switch, overload protection,
control board and the transformer are connected correctly.
c. Ensure the wire from the computer to the control board is
connected properly. Remove the upright tube and check the
connection between each wire. Ensure each wire is completely
plugged in; if wires are damaged please change the wire.
d. Check the state of the transformer is good, if broken, change it.
E01
Message failure
1. The wires from computer and bottom control board are not
properly connected, please check each wire. If the wire was
destroyed replace it.
2. Check the state of the transformer is good, if broken, change it.
E02
Burst clash
1. Ensure power is correct, if not, use correct power to test.
2. Check if the bottom control is burnt out, if burnt out replace it
and then reconnect the motor wire.
E03
No sensor signal
1. The sensor signal was not detected within 10 seconds. Check
the sensor plug connection
2. See if the magnetic sensor is broken or damaged, re-connect
the plug well or change the sensor.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lifespan Boost at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lifespan Boost in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info