805902

LifeGoods LG1102 Manual

14
Zoom out
Zoom in
Previous page
1/21
Next page
26 27
Cleaning the Side Brush
Remove the brush. Clean the brush stand and reinstall the brush.
Cleaning the Cliff Sensors and Charging Contacts
Wipe the robot’s cliff sensors with a clean and dry cloth. Wipe the charging contacts on the robot and
the charging base with a clean and dry cloth.
Cleaning the Floor Tracking Sensor
Use a clean and dry microber or soft cotton cloth to wipe any debris that has accumulated in the round
sensor opening on the right side of the bottom surface. Do not spray cleaning solution directly into the
sensor entrance.
Cleaning the Rolling Brush
Pull on the release tabs to unlock the brush guard. Lift the rolling brush to remove it. Clean the rolling
brush with the cleaning brush or with a vacuum cleaner. Reinstall the rolling brush by inserting the xed
protruding end rst and then clicking it into place. Press the brush guard down until it clicks into place.
-
-
-
-
Troubleshooting
The power button
stays red
One beep The front driving
wheel is stuck.
Clean the front driving wheel and press
the power button to restart the robot.
Two beeps The side brush is
stuck.
Clean the side brush and press the
power button to restart the robot.
Three beeps
The vacuum fan
is stuck, or the
lter is clogged.
- Remove and empty the robot’s dust
bin.
- Empty the lter.
- Make sure the vacuum inlet is not
blocked by any hair or debris.
Four beeps The main rolling
brush is stuck.
Remove and clean the main rolling
brush and brush guard. Press the power
button to restart the robot.
The power button
ashes red
Two beeps The bumper is
stuck.
- Tap the bumper to dislodge any debris
that might be trapped underneath.
- Press the bumper 5-10 times to ensure
that the bumper contracts freely.
Three beeps
- The cliff sensors
are dirty
- The robot is
hanging over a
drop or is stuck
on a dark surface
- Clean the cliff sensors with a dry cloth.
- Start cleaning in a new location if the
robot is hanging over a drop or is stuck
on a dark surface.
- Use the boundary strip or a physical
barrier to block off the problem area.
Four beeps
- Battery power
is too low.
- Robot cannot
return to its char-
ging dock.
- Manually take the robot to its charging
dock to charge.
- Ensure that there are no obstacles in
front of the charging dock. Wipe the
contacts on both the robot and char-
ging dock clean with a clean, dry cloth.
Storage
Always let the Robot Vacuum Cleaner charge on the charging dock when you are not using it. Place the
Robot Vacuum Cleaner and charging dock in a clean and dry place. Do not store the device in extreme
high or extreme low temperatures.
-
Disposal - Recycle
Contribute to a cleaner living environment! Do not dispose of the Robot Vacuum Cleaner with the
household waste. For proper recycling, please contact your local authority or your household waste
disposal service for further details on your nearest designated collection point.
-
Service and Warranty
If you need service or information regarding your product, please contact the LifeGoods Customer
Support at service@lifegoods.nl
LifeGoods provides a 2 year warranty on its products. To obtain service during the warranty period, the
product needs to be returned with a proof of purchase. Product defects have to be reported within 2
years from the date of purchase. This warranty does not cover: damages caused by misuse or incorrect
repair; parts subject to wear; defects that the customer was aware of at the time of purchase; damages
or defects caused by customer neglect; damages or defects caused by third parties.
-
-
Disclaimer
Changes reserved; specications are subject to change without stating grounds for doing so.
-
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGoods LG1102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGoods LG1102 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 5.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info