552436
13
Zoom out
Zoom in
Previous page
1/21
Next page
12
6. Front Handlebar, Front/Rear Decorative Covers for Front Post, and Computer
Installation
Place the Front Handlebar (7) through clamp on the top end of the Front Post (13).
Connect the Extension Hand Pulse Sensor Wire C (10) and Extension Sensor Wire A (89)
from the Front Post (13) to the Extension Hand Pulse Sensor Wires D (3) and Extension
Sensor Wire B (2) from the Front Handlebar (7). Hold the Front Handlebar (7) in desired
position and fasten Front/Rear Decorative Covers for Front Post (8, 17), M8x75 Front
Handlebar T-Knob (15), and Ø12x1.5x50 Spacer (16) onto clamp and tighten Front/Rear
Decorative Covers for Front Post (8, 17) with one ST4.2x20mm Screw (4) and eight
ST2.9x16mm Screws (9). Tighten screws with the Multi Hex Tool with Phillips Screwdriver
provided.
NOTE: M8x75 Front Handlebar T-Knob should be tightly secured before using.
Connect the Extension Hand Pulse Sensor Wires D (3) and Extension Sensor Wire B (2) to
the wires that come from the Computer (1). Then install the Computer (1) to the Front
Handlebar (7) by inserting the Computer (1) into the Front Handlebar (7), using two
ST4.2x20mm Screws (4). Tighten screws with the Multi Hex Tool with Phillips Screwdriver
provided.
Hardware:
3 Screws
(ST4.2x20mm)
8 Screws
(ST2.9x16mm)
1 Front Handlebar T-Knob
(M8x75)
1 Spacer
(Ø12x1.5x50)
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
1
15
16
4
17
7
8
4
9
9
2
3
3
3
2
10
89
4
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Transport Magnetic Recumbent Bike 26680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Transport Magnetic Recumbent Bike 26680 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info