552436
10
Zoom out
Zoom in
Previous page
1/21
Next page
9
3. Right/Left Foot Pedals and Back/Seat Support Bracket Installation
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and
“L” for Left.
Insert the pedal shaft of Left Foot Pedal (29) into threaded hole in the left Crank (43). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (29) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (46) into threaded hole in right Crank (43). Turn the
pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Foot Pedal (43) with the Multi Hex Tool with Phillips Screwdriver
provided.
Remove eight M8x15mm Bolts (18), eight Ø16xØ8x1.5t Washers (53), and the Seat Sliding
Tube (79) from the Back and Seat Support Bracket (82). Remove bolts with the S6 Allen
Wrench provided.
Insert the Seat Sliding Tube (79) into the Bushings (72) of the Rear Main Frame (67).
Attach the Seat Sliding Tube (79) to the Back and Seat Support Bracket (82) with eight
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Allen Wrench S6
Tool:
46
28
29
43
79
18
18
53
53
18
53
73
71
72
18
53
82
67
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Transport Magnetic Recumbent Bike 26680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Transport Magnetic Recumbent Bike 26680 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info