552434
14
Zoom out
Zoom in
Previous page
1/22
Next page
13
7. Handlebar and Computer Installation
Remove two Ø16xØ8x1.5t Curve Washers (24) and two M8x20mm Bolts (89) from the Front
Post (32). Remove bolts and curve washers with an Allen Wrench provided. Connect the
Sensor Wire II (36) from the Front Post (32) to the Sensor Wire II (36) from the Handlebar
(23). Then attach the Handlebar (23) onto the Front Post (32) with two Ø16xØ8x1.5t Curve
Washers (24) and two M8x20mm Bolts (89) that were removed. Tighten bolts and curve
washers with an Allen Wrench provided.
Connect the Sensor Wire II (36) and Hand Pulse Sensor Wires (21) from the Handlebar (23)
to the wires that come from the Computer (18) and then attach the Computer (18) onto the
top end of the Handlebar (23) with two ST4.2x20mm Screws (9). Tighten screws with a
Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
2 Screws (ST4.2x20mm)
Allen Wrench S6
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
24
24
89
89
23
23
36
36
32
32
18
18
21
21
36
36
21
21
36
36
9
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Transport Elliptical Trainer 93680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Transport Elliptical Trainer 93680 in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info