552410
12
Zoom out
Zoom in
Previous page
1/16
Next page
11
3. Install the Handlebar Post.
Remove one M8x15 Bolt (8), Ø8 Curve Washer (7),
four Ø8 Flat Washers (18), and M8x10 Bolts (69) from
the tube of the Main Frame (38).
Slide the Handlebar Post Cover (17) up from the
bottom end of the Handlebar Post (9).
Connect the Sensor Wire II (65) from the Main Frame
(38) to the Sensor Wire I (19) from the Handlebar Post
(9).
Insert the Handlebar Post (9) onto the tube of the Main
Frame (38) and secure with one M8x15 Bolt (8), Ø8
Curve Washer (7), four Ø8 Flat Washers (18), and
M8x10 Bolts (69) that were removed. Be careful not
to pinch the cables inside the Handlebar Post (9) when
turning the M8x10 Bolts (69).
Slide the Handlebar Post Cover (17) down onto the
tube of the Main Frame (38).
4. Install the Handlebar and Computer.
Remove two M8x15 Bolts (8) and Ø8 Curve Washers
(7) from the Handlebar Post (9).
Insert the Hand Pulse Sensor Wires (2) into the hole
on the Handlebar Post (9) and then pull them out from
the top end of the Handlebar Post (9).
Attach the Handlebar (14) onto the Handlebar Post (9)
with two M8x15 Bolts (8) and Ø8 Curve Washers (7)
that were removed.
Remove four M5x15 Bolts (6) from the Computer (5).
Connect the Hand Pulse Sensor Wires (2) and Sensor
Wire I (19) to the wires that come from the Computer
(5). Then attach the Computer (5) onto the top end of
the Handlebar Post (9) with four M5x15 Bolts (6) that
were removed.
5. Using the Adaptor.
Plug the wire of the Adaptor (66) into the power jack of
the Bottom Section Power Supply Cable (64) on the
Left Cover (23) and then connect the Adaptor (66) to
the electrical wall outlet.
69
8
69
7
18
18
17
65
9
38
19
3
9
14
7
8
2
19
6
2
5
4
66
64
23
5
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Streamline Prime - Magnetic Upright Bike PC 20670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Streamline Prime - Magnetic Upright Bike PC 20670 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info