552410

LifeGear Streamline Prime - Magnetic Upright Bike PC 20670 Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
6
the ENTER button to confirm the values and the next pre-set target functional mode will flash.
You can skip to pre-set the next target functional mode and then press the ST/SP button to
start the workout. Please hold both two hands on to the handlebar pulse sensors during
exercise. If the heart rate detected higher than the target heart rate, the computer will begin
beeping to remind you.
NOTE: If no pulse signal input within 16 seconds, the display will indicate “P”.
In the stop mode, the computer can not measure the heart rate.
START: Indicates the program selected has started.
STOP: Indicates the program selected has stopped. User is free to change the programs
and the value of functions applied.
PROGRAM: Indicates the programs selected from PROGRAM 1 to PROGRAM 6.
This system contains one manual and six programs. You can pre-set the workout time and
the computer system will divide the time by 10 intervals. If you don’t pre-set workout time,
computer system will count up the workout time in one-second increment.
PROGRAM GRAPH:
Each graph shown is the profile of the resistance level and time in each interval. With the
value of TIME counting down, each interval is the value of setup TIME divided by 10. For
example, if the time value is setup to 40 minutes, each interval will be 40 minutes divided by
10 intervals (40/10=4). Then, each interval will be 4 minutes.
Press the UP or DOWN button to choose desired program from Manual and Program 1 to
Program 5. Press the ENTER button to confirm your desired program and TIME will flash
for pre-setting the target time. You may skip to pre-set the functional modes of the TIME,
DIST (Distance), CAL (Calories), and PULSE Limit in PROGRAM mode, then press the
ST/SP button to begin the work out. You may also pre-set the functional modes of the
TIME, DIST (Distance), CAL (Calories), and PULSE Limit in PROGRAM mode, then press
the ST/SP button to begin the work out. The resistance level will change according to the
program graph.
NOTE: Program 6 is a very unique program; it allows the computer to adjust the resistance
level according to your heart rate automatically.
Press the UP or DOWN button to choose program 6. Press the ENTER button to confirm
the program and TIME will flash for presetting target time. You may skip to pre-set the
functional mode of the TIME, DIST (Distance), or CAL (Calories) in PROGRAM mode. You
may pre-set the target heart rate by pressing the UP or DOWN button and then press the
ST/SP button to begin the workout. Please hold both two hands on to the handlebar pulse
sensors. If your present heart rate is higher than your target heart rate, the computer will
decrease the resistance level automatically. If your present heart rate is lower than your
target heart rate, the computer will increase resistance level.
MANUAL: Indicates the manual mode.
RESISTANCE LEVEL: Indicates the resistance level selected from LEVEL 1 to LEVEL 8.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Streamline Prime - Magnetic Upright Bike PC 20670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Streamline Prime - Magnetic Upright Bike PC 20670 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info