552471
8
Zoom out
Zoom in
Previous page
1/18
Next page
7
ASSEMBLY INSTRUCTIONS
1. Front/Rear Stabilizers and Left/Right Foot Pedals Installation
Position the Front Stabilizer (2) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (2) onto the front curve of the Main Frame (1) with two M8x70
Carriage Bolts (17), two Ø8xØ20x1.5t Curve Washers (14), and two M8 Cap Nuts (30).
Tighten cap nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (3) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (3) onto the rear curve of the Main Frame (1) with two M8x70
Bolts (75) and two Ø8xØ20x1.5t Curve Washers (14). Tighten bolts with the S6 Allen
Wrench provided.
Install two M10 Adjustable Levelers (74) with two M10x6t Hexagon Nuts (73) onto the Rear
Stabilizer (3).
Foot Pedals Installation
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and
“L” for Left.
Insert the pedal shaft of Left Foot Pedal (44) into threaded hole in the left Crank (39). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (44) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (45) into threaded hole in right Crank (39). Turn the
pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Foot Pedal (45) with the Multi Hex Tool with Phillips Screwdriver
provided.
Hardware:
(14) Curve Washer
Ø8xØ20x1.5t
4 PCS
(17) Carriage Bolt M8x70
2 PCS
(30) Cap Nut M8
2 PCS
(75) Bolt M8x70
2 PCS
Allen Wrench S6
Tool:
Multi Hex Tool with Phillips Screwdriver
14
30
17
75
74
73
73
74
45
44
1
3
2
14
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Meteor - Magnetic Upright Bike 20590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Meteor - Magnetic Upright Bike 20590 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info