552468
11
Zoom out
Zoom in
Previous page
1/16
Next page
10
4. Handlebar and Computer Installation
Remove two M8x15 Bolts (24) and two Ø8 Curve Washers (37) from the Handlebar Post (3).
Remove bolts with S6 Allen Wrench provided.
Insert the Hand Pulse Sensor Wires (64) into the hole on the Handlebar Post (3) and then
pull the Hand Pulse Sensor Wires (64) out from the top end of the Handlebar Post (3).
Attach the Handlebar (2) onto the Handlebar Post (3) with two M8x15 Bolts (24) and two Ø8
Curve Washers (37) that were removed. Tighten bolts with S6 Allen Wrench provided.
Remove two M5x10 Bolts (47) from the Computer (10). Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided. Connect the Extension Sensor Wire (59) and Hand
Pulse Sensor Wires (64) to the wires that come from the Computer (10). Tuck wires into
the Handlebar Post (3). Attach the Computer (10) onto the top end of the Handlebar Post
(3) with two M5x10 Bolts (47) that were removed. Tighten bolts with the Multi Hex Tool with
Phillips Screwdriver provided.
Multi Hex Tool with Phillips Screwdriver
S13, S14, S15
Allen Wrench S6
Tool:
64
59
10
47
24
37
2
3
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Magnetic Upright Bike 20121HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Magnetic Upright Bike 20121HP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info