Manual LifeGear Knight Magnetic Upright Bike 20770 (page 15 of 19) (English)

549173

Zoom out

Zoom in

1/19

DIST (DISTANCE):Displays the accumulative distance traveled during workout. You may

Also pre-set target distance in STOP mode before training. To set DISTANCE press the

MODE button until you see the DIST displays on the screen. Press the SET button to set

the target distance, each time you press the SET button DISTANCE should change by 1 km.

Press the RESET button to clear the target distance to zero. The pre-set target distance

range is from 0.0 to 999.0 km. Once you pre-set target distance and then start to exercise,

distance starts counting down from pre-set target distance to 0.0. When the pre-set target

distance counts down to 0.00, distance will start to count up and the computer will begin

beep to remind you.

CAL (CALORIES): Displays the total accumulated calories burned during workout. You

may also pre-set target calories in STOP mode before training. To set CALORIES press

the MODE button until you see the CAL displays on the screen. Press the SET button to

set the target calories, each time you press the SET button CALORIES should change by 1

calorie. Press the RESET button to clear the target calories to zero. The pre-set target

calories range is from 0.0 to 999.0 calories. Once you pre-set target calories and then start

to exercise, calories start counting down from pre-set target calories to 0.0. When the

pre-set target calories count down to 0, calories will start to count up and the computer will

begin beep to remind you. (This data is a rough guide for comparison of different exercise

sessions and should not be used in medical treatment).

ODO (ODOMETER): Displays the total accumulative distance traveled. The data values of

ODO can not be clear to zero by pressing and holding the MODE or RESET button for 2

seconds. If you take out the batteries from the computer, the ODO data values will clear to

zero.

P (PULSE): Displays your current heart rate figures after you grip the handlebar sensors

with both your hands during exercise. To ensure the pulse readout is more precise, please

always hold on to the handlebar grip sensors with two hands instead of just with one hand

only when you try to test your heart rate figures. You may also pre-set target heart rate in

STOP mode before training. To set PULSE press the MODE button until you see the

displays on the screen. Press the SET button to pre-set target heart rate. Press the

RESET button to clear the target heart rate to zero. Once you pre-set target heart rate and

then start to exercise, please grip the handlebar sensors with both your hands during

exercise. If the heart rate detected greater than the target heart rate, the computer will

begin beep to remind you.

HOW TO INSTALL THE BATTERIES:

1. Remove the battery cover on the back of the computer.

2. Place two size AA batteries into the battery housing.

3. Insure batteries are correctly positioned and battery springs are in proper contact with

batteries.

4. Re-install the battery cover.

5. If the display is illegible or only partial segment appears, remove batteries and wait 15

seconds before reinstalling.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Knight Magnetic Upright Bike 20770 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

LifeGear Knight Magnetic Upright Bike 20770 Manual

Product: