552424
16
Zoom out
Zoom in
Previous page
1/20
Next page
15
7. Computer and Handlebar Installation
Remove four M5x10 Bolts (57) from the back of the
Computer (56).
Remove two M8x15 Bolts (41) and Ø20xØ8 Curve
Washers (42) from the Front Post (5).
Insert the Hand Pulse Sensor Wires (69) from the
Handlebar (6) into the hole on the Front Post (5) and
then pull them out from the top end of the Front Post
(5).
Attach the Handlebar (6) onto the Front Post (5) with
two M8x15 Bolts (41) and Ø20xØ8 Curve Washers (42)
that were removed.
Connect the Sensor Wire I (67) and Hand Pulse Sensor
Wires (69) to the wires that come from the Computer (56)
and then attach the Computer (56) onto the top end of the
Front Post (5) with four M5x10 Bolts (57) that were removed.
Tool:
5
56
67
57
69
42
41
6
69
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Allen Wrench 6mm
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Gentle Revolution - Elliptical Trainer 93320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Gentle Revolution - Elliptical Trainer 93320 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info