552451
11
Zoom out
Zoom in
Previous page
1/24
Next page
10
3. Left/Right Handrail Arms, Left/Right Foot Bars, Left/Right Foot Pedals, and Foot
Bar Covers-A/B Installation
Remove two M8x20 Bolts (40), two Ø8 Spring Washers (41), two Ø8 Big Washers (46), and
two Ø38x3 Washers (42) from the left and right horizontal axes of the Front Post (5).
Remove bolts and washers with the Multi Hex Tool provided.
Attach the Left Handrail Arm (3L) onto the left horizontal axis of the Front Post (5) with one
M8x20 Bolt (40), one Ø8 Spring Washer (41), one Ø8 Big Washer (46), and one Ø38x3
Washer (42) that were removed. Tighten bolts and washers with the Multi Hex Tool
provided.
Attach the left U Shape Bracket (20) to the left Crank (75) with one 1/2” Bolt for left U Shape
Bracket (13L), one Ø28xØ17x0.3 Wave Washer (15), Ø20 Spring Washer (17), and 1/2”
Left Nylon Nut (14L). Tighten bolt and washers with the S8 Allen Wrench provided. Install
a S13 Bolt Cap (28) onto the M8x50 Bolt (23).
NOTE: 1/2” Bolt for left U Shape Bracket (13L) and 1/2” Bolt for right U Shape Bracket
(13R) are marked “R” for Right and “L” for Left.
Attach the Left Foot Pedal (33) onto the Left Foot Bar (2L) with three M6 Nylon Nuts (24),
three Ø6xØ12x1 Washers (25), and three M6x40 Bolts (26). Tighten nylon nuts with the
Multi Hex Tool with Phillips Screwdriver provided.
Remove four ST4.2x25 Phillips Self Tapping Screws (60) from Left and Right Foot Bars (2L).
Attach the Foot Bar Covers-A/B (30L, 30R) onto the Left Foot Bar (2L) with one ST4.2x25
Screws (29) and two ST4.2x25 Phillips Self Tapping Screws (60) that were removed.
Tighten screws with the Multi Hex Tool with Phillips Screwdriver provided.
Repeat above step to attach the Right Handrail Arm (3R) onto the right horizontal axis of the
Front Post (5) and right U Shape Bracket (20) to the right Crank (75).
Multi Hex Tool
S10, S13, S17, S19
Allen Wrench S8
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
60
26
60
30L
30R
3R
2R
48
5
33
2L
15
13R
24
25
29
3L
42
40
41
46
17
14R
13L
15
17
14L
28
75
20
20
28
23
23
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Formula 2 in 1 Elliptical Trainer 93586 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Formula 2 in 1 Elliptical Trainer 93586 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info