552417
9
Zoom out
Zoom in
Previous page
1/15
Next page
8
ASSEMBLY INSTRUCTIONS
1. Front Stabilizer Support Installation
Remove six Ø8 Washers (38), four M8x15 Bolts
(24), and two M6x30 Bolts (61) from the Front
Stabilizer Support (37).
Insert the Front Stabilizer Support (37) into the
tube of Main Frame (1) and align bolt holes.
Secure the Front Stabilizer Support (37) with six
Ø8 Washers (38), four M8x15 Bolts (24), and
two M6x30 Bolts (61) that were removed.
Tighten bolts with the Allen Wrench provided.
Tool:
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
2. Front and Rear Stabilizers Installation
Position the Front Stabilizer (6) in front of
Front Stabilizer Support (37) and align bolt
holes.
Attach the Front Stabilizer (6) onto the front
curve of the Front Stabilizer Support (37)
with two M10 Cap Nuts (34), M10x57 Bolts
(35), and Ø10 Curve Washers (36).
Tighten bolts with the Multi Hex Tool
provided.
Position the Rear Stabilizer (4) behind the
Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (4) onto the rear
curve of the Main Frame (1) with two M10
Cap Nuts (34), M10x57 Bolts (35), and Ø10
Curve Washers (36). Tighten bolts with the
Multi Hex Tool provided.
Hardware:
37
1
38
24
61
24
38
38
4 Cap Nuts (M10)
4 Bolts (M10x57) 4 Curve Washers (Ø10)
Allen Wrench 6mm
34
36
35
6
35
36
34
37
1
4
Tool:
Multi Hex Tool
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Evoke - Basic Magnetic Upright Bike 20295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Evoke - Basic Magnetic Upright Bike 20295 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info