552402
12
Zoom out
Zoom in
Previous page
1/16
Next page
11
5. Install the Lower Handrails and Left/Right Foot Bars.
Install two Safety Covers (85) onto the Lower Handrails (5).
Attach Left and Right Foot Bars (6, 7) to the Cranks (9) with
two M8x28x1.5 Washers (45), M8 Spring Washers (100),
and M8x20 Bolts (26).
Attach two Lower Handrails (5) to the Left and Right Upper
Handrails (3, 4) with four M8 Curve Washers (40), M8(UCP)
Spring Washers (57), and M8x15 Bolts (25).
6. Install the Left and Right Foot Pedals.
Attach Left and Right Foot Pedals (86) onto Left and Right
Foot Bars (6, 7) with four Washers for Foot Pedal (50),
M6x55 Carriage Bolts (24), M6x16x1.2 Washers (44), M6
Spring Washers (58), and M6 Foot Pedal Knobs (74).
Attach both Rear Foot Bar Covers (84) onto the rear end of
the Left and Right Foot Bars (6, 7) with two M5x12 Bolts
(36).
Attach Front Left and Right Foot Bar Covers (81, 82) onto
the front end of the Left and Right Foot Bars (6, 7) with two
M4x16 Screws (38) and four M5x12 Bolts (36).
7. Install the Computer.
Remove four M5x15 Bolts (35) from the back of the
Computer (94). Connect the Sensor Wire I (98) to the wire
that comes from the Computer (94) and then attach the
Computer (94) onto the top end of the Front Post (2) with
four M5x15 Bolts (35) that were removed.
8. Install the Handlebar.
Insert the Hand Pulse Wire (101) into the left hole on the
Front Post (2).
Attach the Handlebar (12) into the holes on the Front Post
(2) with four M10x28 Bolts (34). Insert the Hand
Pulse Wire (101) through into the hole on the Ø34×Ø22.2
Round Plug (70) and pull then it out. Finally, cover the
holes on the Front Post (2) with two Ø34×Ø22.2 Round
Plugs (70).
25
40
57
4
3
5
85
85
5
7
6
26
100
45
26
100
45
9
9
2
1
94
98
35
2
2
12
94
101
70
34
34
36
36
84
84
36
38
82
81
36
81
82
36
38
36
5
85
7
8
6
6&7
86
44
58
74
24
50
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear DELUXE MAGNETIC ELLIPTICAL ML 93700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear DELUXE MAGNETIC ELLIPTICAL ML 93700 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info