552403
19
Zoom out
Zoom in
Previous page
1/25
Next page
18
ASSEMBLY INSTRUCTIONS
1. Install the Front Stabilizer.
Attach the Front Stabilizer (13) onto the front curve plate
of Main Frame (1) with two M8x52 Carriage Bolts (23),
M8x16x1.2 Washers (43), M8 (UCP) Spring Washers (57),
and M8 Nylon Nuts (53). Finally, cover the M8 Nylon
Nuts (53) with two M8xØ19 Bolt Caps (92).
2. Install the Rear Stabilizer.
Attach the Rear Stabilizer (14) onto the rear curve plate of
Main Frame (1) with two M8x52 Carriage Bolts (23),
M8x16x1.2 Washers (43), M8 (UCP) Spring Washers (57),
and M8 Nylon Nuts (53). Finally, cover the M8 Nylon
Nuts (53) with two M8xØ19 Bolt Caps (92).
3. Install the Front Post.
Connect Sensor Wire II (99) from Main Frame (1) to
Sensor Wire I (98) from Front Post (2).
Insert Front Post (2) into the tube of the Main Frame (1)
and secure with six M8x15 Bolts (25), M8 (UCP) Spring
Washers (57), and M8x16x1.2 Washers (43).
4. Install the Handrail Axle and the Upper Left/Right
Handrails.
Insert the Handrail Axle (20) into the hole on the Right
Upper Handrail (4) and secure with one M8x28x1.5
Washer (45), M8 Spring Washer (108), and M8x20
Hexagon Head Bolt (33).
Insert the Handrail Axle (20) with Right Upper Handrail (4)
into the hole on the Front Post (2).
Attach the Left Upper Handrail (3) onto the other end of
the Handrail Axle (20) with one M8x28x1.5 Washer (45),
M8 Spring Washer (108), and M8x20 Hexagon Head Bolt
(33). Finally, cover M8x28x1.5 Washers (45), M8 Spring
Washers (108), and M8x20 Hexagon Head Bolts (33) with
two M8xØ43 Bolt Caps (93).
1
2
3
4
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Deluxe Magnetic Elliptical 93600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Deluxe Magnetic Elliptical 93600 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info