552430
11
Zoom out
Zoom in
Previous page
1/18
Next page
10
ASSEMBLY INSTRUCTIONS
1. Rear Main Frame Installation
Remove two M8x30 Bolts (45), four M8x15 Bolts (72), and six Ø8 Washers (36) from the
Rear Main Frame (46).
Connect the Middle Section Hand Pulse Sensor Wires (44) from the Rear Main Frame (46)
to the Extension Hand Pulse Sensor Wires (70) from the Front Main Frame (21).
Attach the Rear Main Frame (46) into the Front Main Frame (21) with two M8x30 Bolts (45),
four M8x15 Bolts (72), and six Ø8 Washers (36) that were removed. Tighten bolts with the
Allen Wrench provided.
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
Hardware:
2. Front and Rear Stabilizers Installation
Position the Front Stabilizer (2) in front of the Front Main Frame (21) and align bolt holes.
Attach the Front Stabilizer (2) onto the front curve of the Front Main Frame (21) with two
M8x70 Bolts (6), Ø8 Big Curve Washers (77), and M8 Cap Nuts (3). Tighten bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (64) behind the Rear Main Frame (46) and align bolt holes.
Attach the Rear Stabilizer (64) onto the rear curve of the Rear Main Frame (46) with two
M8x70 Bolts (6), Ø8 Big Curve Washers (77), and M8 Cap Nuts (3). Tighten bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Allen Wrench S6
Tool:
72
72
36
36
21
46
45
44
70
4 Bolts (M8x70)
4 Big Curve Washers (Ø8)
4 Cap Nuts (M8)
Tool:
Multi Hex Tool with
Phillips Screwdriver
2
6
3
77
3
77
67
3
77
64
6
3
77
21
46
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Advanced - Magnetic Recumbent Bike 26390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Advanced - Magnetic Recumbent Bike 26390 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info