552430

LifeGear Advanced - Magnetic Recumbent Bike 26390 Manual

4
Zoom out
Zoom in
Previous page
1/18
Next page
3
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the load, turn the tension control knob in a clockwise direction.
To decrease the load, turn the tension control knob in a counterclockwise direction.
Adjusting the Adjustable Leveler
Turn the adjustable leveler on the rear stabilizer as needed to level the recumbent bike.
Adjusting the Seat Forward or Back
Release the triangle knob from the rear main frame. Turn the round knob in a
counterclockwise direction until it can be pulled out. Pull out the round knob and then slide
the back and seat support bracket back or forth direction to the suitable position. Lock the
back and seat support bracket in place by releasing the round knob and sliding the back and
seat support bracket back or forth slightly until the round knob "pops" down into the hole of
the seat sliding tube. For added safety, tighten the round knob and triangle knob in a
clockwise direction.
NOTE: When adjusting the seat back or forth direction, the maximum insert depth
mark line cannot over than the edge of bushing.
OPERATING THE COMPUTER
SPECIFICATIONS:
TIME---------------------------------------------------- 0:00-99:59 MIN: SEC
SPEED------------------------------------------------- 0.0-999.9 KM/H
DIST (DISTANCE)----------------------------------- 0.0-999.9 KM
CAL (CALORIES)------------------------------------ 0.0-999.9 KCAL
ODO (ODOMETER)--------------------------------- 0.0-999.9 KM
(PULSE)--------------------------------------------40-240 BEATS/MIN
BUTTON FUNCTIONS:
MODE: Press MODE button to select each function of computer.
Press and hold MODE button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
SET: Press SET button to set data values of TIME, DISTANCE, CALORIES, or Pulse for
target presetting.
RESET: Press RESET button to clear data values of TIME, DISTANCE, or CALORIES to
zero.
Press RESET button to clear data values of TIME, DISTANCE, CALORIES, or Pulse to zero
for target presetting.
Press and hold RESET button for 3 seconds, all data values will clear to zero except the
ODO (ODOMETER) data values.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Advanced - Magnetic Recumbent Bike 26390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Advanced - Magnetic Recumbent Bike 26390 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info