552428

LifeGear Advanced - 2 in 1 Elliptical Trainer 93396 Manual

6
Zoom out
Zoom in
Previous page
1/22
Next page
5
before training. Press MODE button to select CAL function and then press SET button to
preset target calories. Press RESET button to clear the target values of CALORIES to zero.
The preset target calories range is from 0.0 to 999.0 calories. Once you preset target
calories and then start to exercise, calories start counting down from preset target calories to
0.0. When the preset target calories count down to 0.0, calories will start to count up
immediately and the computer will begin beeping to remind you. (This data is a rough guide
for comparison of different exercise sessions and should not be used in medical treatment).
ODO (ODOMETER): Press MODE button the screen displays ODO; the computer will
display the total accumulative distance traveled. The data values of ODO can not be clear
to zero by pressing and holding MODE or RESET button for 3 seconds. If you take out the
batteries from the computer, the ODO data values will clear to zero.
(PULSE): Press MODE button until the screen displays a symbol; the computer will
display your current heart rate figures after you hold both two hands on handlebar grip
sensors during exercise. To ensure the pulse readout is more precise, please always hold
on to the handlebar grip sensors with two hands instead of just with one hand only when you
try to test your heart rate figures.
You may also preset target heart rate before training. Press MODE button to select
PULSE function and then press SET button to preset target heart rate. Press RESET
button to clear the target heart rate to zero. The preset heart rate range is from 40 to 240
beats/minute. Once you preset target heart rate and then start to exercise, please hold
both two hands on handlebar grip sensors during exercise. If the heart rate detected
greater than the target heart rate, the computer will begin beeping to remind you.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of computer.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appear, remove batteries and wait 15
seconds before reinstalling.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Advanced - 2 in 1 Elliptical Trainer 93396 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Advanced - 2 in 1 Elliptical Trainer 93396 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info