549148
12
Zoom out
Zoom in
Previous page
1/19
Next page
11
5. Front Handlebar Post, Front Handlebar Post Cover, and Computer Installation
Remove one Ø8xØ20 Big Curve Washer (28), four Ø8xØ16 Washers (49), and five M8x15
Bolts (23) from the tube of the Front Main Frame (27). Remove bolts with the 5mm Allen
Wrench provided.
Slide the Front Handlebar Post Cover (20) up to the Front Handlebar Post (26).
Connect the Extension Hand Pulse Sensor Wires B (22B) and Sensor Wire (40B) from the
Front Main Frame (27) to the Extension Hand Pulse Sensor Wires A (22A) and Extension
Sensor Wire (40A) from the Front Handlebar Post (26).
Turn the Tension Control Knob (31) in a clockwise direction to the highest level. Put the
cable end of resistance cable of Tension Control Knob (31) into the cable lock of Tension
Cable (56), see Figure A.
Pull the resistance cable of Tension Control Knob (31) up and force it into the slot of metal
bracket of Tension Cable (56), see Figure B.
Insert the metal fitting on the resistance cable of Tension Control Knob (31) into the hole at
the end of the slot in the metal bracket of Tension Cable (56), see Figure C.
Connect the resistance cable of Tension Control Knob (31) to Tension Cable (56) complete,
see Figure D.
Insert the Front Handlebar Post (26) onto the tube of the Front Main Frame (27) and secure
with one Ø8xØ20 Big Curve Washer (28), four Ø8xØ16 Washers (49), and five M8x15 Bolts
(23) that were removed. Tighten bolts with the 5mm Allen Wrench provided.
Slide the Front Handlebar Post Cover (20) down to the Front Main Frame (27).
Remove four M5x10 Bolts (30) from the back of the Computer (29). Remove bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Connect the Extension Hand Pulse Sensor Wires A (22A) and Extension Sensor Wire (40A)
to the wires that come from the Computer (29). Tuck wires into the Front Handlebar Post
(26).
Multi Hex Tool with Phillips Screwdriver
Tool:
Allen Wrench 5mm
A
B
C
D
3
31
31
40A
40A
40B
40B
28
28
56
56
56
56
56
31
22B
22B
26
26
29
29
31
31
20
20
49
49
23
23
27
27
23
23
22A
22A
40A
40A
22A
22A
30
30
31
31
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Accord Magnetic Recumbent Bike 26470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Accord Magnetic Recumbent Bike 26470 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info