549148
8
Zoom out
Zoom in
Previous page
1/19
Next page
7
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Turn the Round Knob (47) in a counterclockwise direction until it can be pulled out. Pull out
the Round Knob (47) and then slide the Rear Main Frame (39) forth or back direction to the
suitable position. Lock the Rear Main Frame (39) in place by releasing the Round Knob (47)
and sliding the Rear Main Frame (39) forth or back slightly until the Round Knob (47)
"pops" down into the locked position. For added safety, tighten the Round Knob (47) in a
clockwise direction.
Position the Front Stabilizer (58) in front of the Front Main Frame (27) and align bolt holes.
Attach the Front Stabilizer (58) onto the front curve of the Front Main Frame (27) with two
M10x60 Carriage Bolts (35), two Ø22xØ10x1.5t Washers (13), and two M10 Cap Nuts (65).
Tighten cap nuts with the Multi Hex Tool provided.
Position the Rear Stabilizer (64) behind the Rear Main Frame (39) and align bolt holes.
Attach the Rear Stabilizer (64) onto the rear curve of the Rear Main Frame (39) with two
M10x60 Carriage Bolts (35), two Ø22xØ10x1.5t Washers (13), and two M10 Cap Nuts (65).
Tighten cap nuts with the Multi Hex Tool provided.
Hardware:
(13) Washer Ø22xØ10x1.5t
4 PCS
(35) Carriage Bolt M10x60
4 PCS
(65) Cap Nut M10
4 PCS
Tool:
Multi Hex Tool
1 3
65
65
58
58
35
35
35
35
64
64
27
27
65
65
1 3
1 3
65
65
47
47
39
39
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Accord Magnetic Recumbent Bike 26470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Accord Magnetic Recumbent Bike 26470 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info