549149
16
Zoom out
Zoom in
Previous page
1/22
Next page
15
6. Handlebar and Computer Installation
Remove two M8x15 Bolts (41) and two Ø20xØ8 Curve Washers (42) from the Front Post (5).
Remove bolts with the 5mm Allen Wrench provided.
Connect the Hand Pulse Sensor Wires (58) from the Handlebar (6) to the Extension Hand
Pulse Sensor Wires (91) from the Front Post (5). Tuck wires into the Front Post (5).
Attach the Handlebar (6) onto the Front Post (5) with two M8x15 Bolts (41) and two Ø20xØ8
Curve Washers (42) that were removed. Tighten bolts with the 5mm Allen Wrench
provided.
Remove four M5x12 Bolts (57) from the back of the Computer (56). Remove bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Connect the Extension Sensor Wire (67) and Extension Hand Pulse Sensor Wires (91) to
the wires that come from the Computer (56). Tuck wires into the Front Post (5). Attach
the Computer (56) onto the top end of the Front Post (5) with four M5x12 Bolts (57) that were
removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with
Phillips Screwdriver
S8, S13, S14, S15
Tool:
Allen Wrench 5mm
5
57
42
41
91
67
6
56
91
91
58
5
58
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Accord Elliptical Trainer 93470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Accord Elliptical Trainer 93470 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info