655180
6
Zoom out
Zoom in
Previous page
1/28
Next page
6
1.4 SETUP
Tools required: Socket set, Phillips Screwdriver, 9/16" open end wrench
Please read instructions carefully before assembly. Be sure to assemble the unit where it is to be used.
STEP 1
Remove the machine from packaging. Carefully lay out and count each part before assembly. Refer to the parts list on page 5 of this
manual.
STEP 2
Assemble the upright tube assembly to the base frame:
NOTE: This step could require two people.
1. Position the upright tube assembly (A) between the plates on the front of the base frame (B).
2. Line up the holes on the plates (B) with the holes on the upright tube assembly (A).
3. Connect the upright tube assembly (A) to the base frame (B) using four (#5) 3-1/4" bolts, eight (#7) washers (4 on each side) and
four (#6) high profile nylock nuts. DO NOT FULLY TIGHTEN AT THIS POINT.
CAUTION: The wire harness may obstruct the connecting holes. If this happens, gently pull on the end of the wire
harness at the top of the upright tube assembly (A) to clear the hole. Do not force the bolt through the hole if the wire
harness is obstructing the bolt, as damage to the wire harness may result.
A
B
4. Insert two (#4) 5 " bolts and two (#7) washers into the backside
of the connector joint on the base frame (B). Connect with two
(#7) washers and two(#6) high profile nylon lock nuts. Start
each bolt, and then tighten with a 9/16 " socket wrench.
5. Tighten all six bolts with a 9/16 " socket wrench.
B
5
6
7
7
7
6
A
7
4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Life Fitness X5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Life Fitness X5 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Life Fitness X5

Life Fitness X5 User Manual - Dutch - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info