655183
10
Zoom out
Zoom in
Previous page
1/28
Next page
10
Activity Zone
plug-in (6-pin)
STEP 5
Plug cables into back of display console:
1. Plug the 10-pin connector at the end of the upper wire harness into the 10-pin connector in the back of the display console.
Make sure the connector snaps into place.
2. Plug the 3-pin connector at the end of the heart rate cable into the 3-pin connector in the back of the display console. Make
sure the connector snaps into place.
3. Plug in flat 6 pin connector for the Activity Zone.
4. Push access cable(s) into opening of upright assembly.
NOTE: #2 and #3 apply to model x3i only.
STEP 4
Attach heart rate accessory tray to upright assembly:
NOTE: This step applies to model x3i only.
1. Before attaching the accessory tray, it is helpful to form the threads in the console plate. Using a 3/8socket wrench, start
the (#0) self-tapping screws into the holes. When threads have formed, remove the screws.
2. Feed the upper wire harness through the slot in the accessory tray bracket.
3. Line up the holes on the accessory tray bracket with the holes on the console plate, and then secure the accessory tray with
the two (#0) self- tapping screws using a 3/8socket wrench.
1.4 SETUP CONTINUED
#0
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Life Fitness x3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Life Fitness x3 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Life Fitness x3

Life Fitness x3 User Manual - German - 26 pages

Life Fitness x3 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info