8
STEP 4:
• Place the two GUIDE RODS (16) through the BOT-
TOM SHROUD BRACKET (A) (FOUND IN THE
SHROUD KIT BOX) into the BASE (2), as shown in
FIGURE 4.
Note: Lubricate the GUIDE RODS (16) with the
included silicon package.
• Slide the following items in order down each GUIDE
ROD (16), one WEIGHT STACK SPACER (45), and
one WEIGHT STACK CUSHION (46).
• Using EXTREME CARE slide all fifteen WEIGHT
PLATES (22) down the GUIDE RODS (16) onto the
WEIGHT STACK CUSHIONS (46). Make sure that the
keyholes of the WEIGHT PLATES (22) are all facing
the right way.
• Slide the HEAD PLATE ASSEMBLY (19) down the
GUIDE RODS (16) onto the weight stack.
• Slide the SHAFT COLLARS (48) down each GUIDE
ROD (16).
STEP 5:
• Carefully slide the RIGHT and LEFT (5 & 4) BOOM PLATES onto the GUIDE RODS (16) as shown in FIGURE 5 and
loosely assembly the BOOM PLATES (5 & 4) to the FRAME (1) using two 3/8 x 3-3/4” BOLTS (30) and two 3/8” LOCK
NUTS (34).
CAUTION MUST BE TAKEN NOT TO PULL THE GUIDE RODS (16) OUT OF THE BASE (2).
• Screw the ADJUSTABLE GLIDE (53) approximately 1/2” into the FRAME (1) and tighten the jam nut securely as
shown.
