655174
24
Zoom out
Zoom in
Previous page
1/32
Next page
22
duty cyclE
The duty cycle is programmed into the unit to prevent the stride actuators from overheating due to overuse of the product.
The duty cycle is defaulted to OFF, but can be turned on through the Settings Menu. For every second the motor is run-
ning, there will need to be 8 seconds of off time to meet the actuator duty cycle. This feature can be enabled to prevent
repeated overuse of actuator.
On the E5 cross-trainer there are 6 increments to the stride length and each increment takes 6 seconds of travel time.
Since the activity zone controls the stride motors, it can maintain the motor duty cycle to reduce over actuation.
The activity zone powers up with the maximum actuation time, entered in settings (45 seconds default), which is the time
the motor is allowed to run before it needs to be shut off to cool down. For every second the motor is active this timer is
decreased by one. For every 8 seconds (default) the motor is off, this timer is increased by one up to the maximum actua-
tion time (45 seconds default).
Every time the stride keys are pressed the activity zone will check the actuation timer to verify there is enough time to
move to the next increment (6 seconds). If there is enough time the motor is activated. If there is not enough time the
activity zone will ignore the key press and ash STRIDE. STRIDE will blink until the OFF timer has been fullled. Key
presses will continue to be ignored and STRIDE will continue to ash until there is time to move one increment. If the mo-
tor is running to a position and the opposite direction key is pressed, the timer is again checked to verify there is enough
time. If the new position has not been passed, the motor will continue to the new position and less time will be required
from the actuation timer.
stridE max limitation
Step 1. Press and hold the Leg Sculptor and Stride Down keys for three plus
seconds. To scroll through Stride Max Limitation, press the Leg Sculptor key four
times. The default mode is shown as -- or 0.
Step 2. To adjust the on time, press the Stride Length Up or Down key. The on
time is defaulted at 0 or off. The on time can be adjusted between 0-8 seconds.
Step 3. To select the desired adjustments for the off time, press the Leg Sculp-
tor Up or Down key. The off time can be set after the on time is selected. You can
select between 45-60 seconds.
Default (Off)
8 Seconds On
45 Seconds Off
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Life Fitness E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Life Fitness E1 in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Life Fitness E1

Life Fitness E1 User Manual - German - 32 pages

Life Fitness E1 User Manual - Dutch - 32 pages

Life Fitness E1 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info