655170

Life Fitness Club Series Treadmill - CST Manual

45
Zoom out
Zoom in
Previous page
1/47
Next page
44
Tensioning an Existing Striding Belt
1. Enter the MANUAL workout and operate the treadmill for fi ve minutes at 5.0 mph (8.0 kph).
NOTE: DO NOT RUN or WALK ON BELT.
2. Reduce the speed to 2.0 mph (3.2 kph). Walk on the treadmill. Tightly grip the handrails and apply force with feet
on the striding belt near the motor cover against the moving belt direction. If the belt slips, continue to Step 3. If it
does not slip, the tension is correct.
3. Using the STOP key, stop the treadmill. Turn the belt tensioning bolts a quarter-turn clockwise for each side.
4. Repeat Steps 2 and 3 until the belt no longer slips. Do not exceed one full turn (four quarter turns) per side when
adjusting the belt tensioning bolts.
5. Enter the MANUAL workout, and operate the treadmill at 2.0 mph (3.2 kph) and check to insure proper tracking. If
the striding belt drifts to the left or right see Tracking (Centering) A Striding Belt on the previous page.
Do not over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may over stretch and
damage the striding belt or roller bearings. Do not exceed one full turn of either bolt in either direction.
6.6 Proactive Belt Wear Notifi cation
The treadmill proactively notifi es the facility manager about belt wear through diagnostics. A single indicator is lit on
the treadmill console (if manager-enabled) when a belt check is required. This indicator light is located in the upper left
corner of the workout profi le window.
Automatic belt check reminder at 30,000 miles (48,000 km)
Notifi cation based on “Unable to Attain Target Speed” errors for specifi c user weights/speeds.
To check for notifi cations:
To enter Belt/Deck Info, press and hold the PAUSE key and press the CLEAR key twice. Continue to hold down the
PAUSE key until the MESSAGE CENTER displays the words “SERVICE MENU”. Use the TIME UP and DOWN arrow keys
to navigate to the INFORMATION Menu. Then access the “Belt / Deck Information” submenu.
NOTE: Notifi cations are automatically cleared once they have been displayed.
6.7 How to Obtain Product Service /
Serial Number Location
1. Verify the symptom and review the operating instructions. The
problem may be unfamiliarity with the product and its features
and workouts.
2. Locate and write down the serial number of the unit which is
located on the back of the unit near the toe guard as well as
under the left rear endcap.
3. Contact Life Fitness Customer Support Services.
Remove plastic shroud to nd large serial label location.
Small Serial Label
Large Serial Label
… 45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Life Fitness Club Series Treadmill - CST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Life Fitness Club Series Treadmill - CST in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info